HMD1 Cs: 1 | 1000 W



A HMD1 vízálló mono erősítő tökéletes megoldás egy vagy több mélynyomó meghajtásához hajójában. Alacsony- (RCA, melynek bemeneti érzékenysége 3 fokozatban szabályozható) magas jelszint (fejegység hangszórókimenete) fogadására egyaránt képes, ahol az Automatic Remote Turn (automatikus bekapcsolás) funkciónak köszönhetően nincs szükség vezérlőszálra. Ideális párosítás a HMD8 DSP aktív hangprocesszor többek közt a megfelelő frekvenciatartomány beállításához. Az erősítő 2 ohm stabil, és rendkívül kompakt mérete mellett akár 1500 W teljesítmény leadására is.

Általános spec.
Channels 1
POWER SUPPLY
Power supply voltage / fuse 11 ÷ 15 VDC / 2 x 30A
Operating power supply voltage 6.5 ÷ 17 VDC
Idling current 1.3 A
Idling current off 0.05 mA
Consumption @ 14.4 VDC, 2Ω, Max Musical Power 50 A
Remote IN 6.5 ÷ 15 VDC (1 mA)
ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 2 ÷ 7 VDC
AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.1%
Damping factor @ 1 kHz, 4Ω, 2 VRMS 140
Bandwidth @ -1.5 dB 10 Hz ÷ 500 Hz
S/N ratio (A weighted @ 1 V Input) Master Input 110 dBA
Input sensitivity Pre-In Selectable: 0.6 - 2.0 - 6.0 VRMS
Input sensitivity Speaker-In Selectable: 2.0 - 6.5 - 20 VRMS
Minimum load impedance
Adjustable Crossovers yes
Kimeneti teljesítmény
1Ch @ 4Ω 500 W
1Ch @ 2Ω 800 W
1Ch @ 1Ω 1000 W
Total Power 1000 W
BEMENETEK / SZŰRŐK
Pre-In Inputs RCA
Speaker-In Inputs Wired
Külső specifikációk
HMD1
Max size W x H x D (mm/inch) 243 x 48 x 159
9.56 x 1.8 x 6.25
Weight (kg/lbs) 1,98 (4.36)
Bemenet/Kimenet
HMD1
Technológiák
HMD1
ADVANCE D-CLASS

Thanks to the Hertz advanced D-CLASS output stage, HMD1 joins maximum sound quality with unmatched efficiency to be very compact and easily installed in any position of the boat.

HMD1
CORROSION PROTECTION

Electronics components corrosion caused by exposure in wet environments is totally neutralized by the use of dedicated Marine grade (epoxy coated) PCB boards.

HMD1
SALT FOG PROOF

To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.

HMD1
WATER JET TESTED

The protection grade IP64 define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.